AQUA CLEAN is based on hydrogen peroxide, but has been enriched with a special complex incorporating silver salt to suit the heavy duty cleaning needs of farm drinking systems. Pollution of drinking systems is caused by deposits such as manganese and calcium, and by the addition of medicines, vaccines and additives. Aqua Clean can be used on all surfaces that are resistant to oxidizing products. It cleans storage tanks, pipe systems, nipples, cups, etc, quickly, easily and safely with a minimum of labour and cost.
APPLICATION:
when the system is not in use:
Administer at the recommended dilution rate directly into the drinker lines via a dosing machine or the header tank. Remove the cap at the end of the system to check for fizzing reaction that shows that Aqua Clean has reached every point. Raise all nipples or cups and allow the solution to circulate, if this is not possible allow the pipe work to stand for a minimum of 12 hours. After cleaning, the system must be flushed with clean water and once again raise all nipples or cups.
When the system is operating in a livestock unit: Administer into the system as above at the recommended dilution rate.
RECOMMENDED DILUTION RATE:
Routine cleaning (livestock out) 1:100 to 1:30 depending on the degree of contamination. Cleaning and conditioning (livestock in) 1:10,000 to 1:4,000. Refer to the product datasheet for full instructions.
PACK SIZE:
10 litres. |